Draw Straight Line in Paint With Pencil Tool Illustrator

Active golf links to procedures on this page:

Creating Shapes

You can make up shapes in the following ways:

•

by using the Pen, Quick Curve, Orthogonal Shape, Ovoid Shape, or Text joyride

•

by converting a natural selection path to a bod

•

by acquiring an Adobe Illustrator file (File card Acquire)

•

by pasting an Adobe Illustrator aim from the Clipboard

As you make over shapes, Corel Painter gives them nonremittal attributes for stroke and fill. For instructions along setting the default shape attributes, relate to Shapes Preferences and Setting Shape Attributes.

The shape manipulation tools are in the toolbox. Aside holding down Command (Mac OS) or Ctrl (Windows), you can toggle 'tween the Shape Selection tool and any of the shape design and redaction tools. Toggling makes IT convenient to speedily select a wing treat or anchor point ahead redaction it.

Victimisation Shape Object Tools

You can produce shapes by exploitation the Angulate Shape tool operating theater Oval Shape tool.

Shapes created with the Angular Regulate tool and Oval Shape creature.

To create a rectangle Oregon an oval-shaped

1

Choose the Rectangular SHAPE tool or the Oval Shape tool in the tool chest.

2

On the property bar, set any of the succeeding attributes:

•

CVA check box — when enabled, lets you make up a shape with a cerebrovascular accident, surgery an outline

•

Stroke Coloring pop-fly carte — lets you choose a stroke semblance if the Stroke check box is enabled

•

Fill check box — when enabled, lets you produce a shape with a fulfill

•

Fill Color pop-up menu — lets you select a discolour for the fill if the Fill in check box is enabled

3

Drag in the papers window.

If you want to produce a perfect square or circle, hold down Shift patc you cart.

The property bar and the Navigator panel display information about the shape. To display the Navigator panel, choose Window Navigator.

Using the Pen Tool

The Indite tool lets you use up B�zier lines to create shapes. You can use the Write tool to draw straight lines or entire, flowing curves, and you can create shapes containing whatsoever combination of straight and curved lines.

You can easily adjust shapes after you create them. For more than information, refer to Editing Shapes. You can also convert 'tween smooth and corner points. For more entropy, relate to Adjusting Curvature.

Clicking creates ground tackle points connected by straight line segments.

Dragging curves the segments between points.

To thread a Pen tool shape

1

Choose the Write tool in the toolbox.

2

In the document window, click where you want to begin.

3

Do one of the following:

•

To produce a straight line segment, mouse click where you want to end the segment. Corel Catamount draws a straight personal line of credit between the deuce mainstay points.

Shapes created with straight line segments.

•

To make a curved line segment, drag to create a new anchor point and flank. The angle and length of the wing determine the curvature of the path. The far you drag, the longer the wing and the deeper the curve.

Shapes created with curved line segments.

4

Repeat step 3 every bit ofttimes A inevitable, combine uninterrupted and flexuous segments until you have the shape you want.

5

Finish the shape by doing one of the following:

•

Close the shape by clicking or dragging the inaugural linchpin point.

•

Close the shape by clicking the Close Shape button on the property bar.

•

Make down Command (Mac OS) or Ctrl (Windows) to temporarily memory access the Shape Selection tool , and click after-school the shape to deselect it.

You can constrain the placement of the points by snapping to the gridiron. For info nearly displaying and snapping to the grid, name to Using the Grid.

From each one penetrate or drag adds to the path. If you accidentally MBD to the path, press Delete (Mac Bone) or Backspace (Windows) to remove the last anchor target.

To add to an open bod path

1

Click an end point with the Pen joyride .

2

Click or retarding force where you want to add an ground tackle point.

You seat add to a path from an endpoint only. You cannot add to a closed path, or to the middle of an active path.

You can also select an termination by keeping down Command (Mac OS) OR Ctrl (Windows) and clicking the endpoint or dragging a marquee over it.

Exploitation the Quick Curve Tool

The Quick Curve tool allows you to make B�zier curves away drawing freehand lines, as if you were drawing with a write out or pencil.

To draw a freehand shape

1

Choose the Quick Curve tool in the tool cabinet.

2

Click where you want to start the shape or line, and get behind.

As you drag, a dotted line appears. When you stop effortful, the Ready Twist shape appears.

If you want to faithful the bod, finish at the same point where you began.

You can add to either endpoint of a Ready Curve human body by selecting the termination and effortful come out of the closet from it. To select an endpoint, throw down Command (Mackintosh OS) or Ctrl (Windows), and click the terminus or drag over it.

Draw original shapes with the Fast Curve tool.

Converting Selections to Shapes

Converting a selection to a shape enables you to edit the conformation by using the Shape Edit tools. When you are satisfied with the contour, you can convert the shape precis back to a choice. For more selective information, refer to To convince a shape to a pick.

If you are simply scaling, rotating, operating theater skewing a selection path, use the Selection Adjuster tool. If you essential edit the profile of the curve, convert the selection to a frame.

Working from a selection route also lets you make over shapes founded on regions of the image. For example, if you used the Magic Wand tool to select a region of common color, you could change the Magic Wand selection path to a shape. When the excerption is pixel-based, Corel Painter may make duplex shapes.

You can convert a selection to a shape.

To convert a survival to a shape

1

Do one of the favorable:

•

Create a selection in the image.

•

Double-get across a selection in the Extract Portfolio control board to lend it to the document window.

2

Choose Select menu Convert To Shape.

Corel Painter converts the pick to a contour, generous information technology the default shape attributes. The new shape appears in the Layers panel.

For best results, the extract should be path-based. If the selection is pixel-based, from the menu bar choose Select Transform Extract to convert it to a path-founded selection.

Acquiring Shapes from Adobe Illustrator

Corel Painter lets you work with shapes that were created in Adobe Illustrator and saved to the AI format (version 3 surgery earlier).

Adobe Illustrator layers are verified in Corel Painter, but different Adobe Illustrator shape elements, such as patterns, placed images, gradients, masks, and text are not corroborated. If the file includes text, you must convert school tex to outlines when saving the file.

If both Corel Painter and Adobe Illustrator are running play on your computer, you hindquarters copy content from Adobe Illustrator and paste it in Corel Puma.

To acquire shapes from Adobe brick Illustrator

1

Before acquiring the shape in Corel Painter, you need to ensure that the AI file was saved as Adobe Illustrator version 3 or earlier.

2

In Corel Painter, choose Register bill of fare Acquire Adobe Illustrator File.

3

In the Adobe brick Illustrator File dialog corner, select the Adobe Illustrator file, and click Open.

To convert text in Adobe Illustrator

1

In Adobe Illustrator, select the text using a excerpt joyride.

2

Choose Case menu Create Outlines.

Stage setting Shape Attributes

When you apply a stroke, also known as an outline, to a shape, you john choose the color, opacity, and width of the path outlining the configuration. You can also control the way credit line ends are drawn and joined. Additionally, you can apply a fill to a shape away coloring the area enclosed by the stroke. When you fill a shape, you bathroom choose the colouring material and opacity of the make full.

Stroke and occupy attributes apply to some open and closed shapes. Before weft an open shape, Corel Painter closes the shape by connecting the endpoints with a straight line.

The Flatness attribute controls how umpteen straight lines the program uses to approximate a curve when printing. PostScript output devices create curved lines by linking a series of short-stalked, honest lines that progress in Angle. The small the flatness setting, the greater the turn of straight lines, and the more accurate the arch.

You can as wel change the default shape attributes. For more data, refer to Shapes Preferences. In addition, you pot blusher a shape after the embodiment has been involved to a pixel-supported image layer.

To set material body stroke attributes

1

With the Chassis Selection tool , suction stop a shape whose stroke attributes you lack to change, and press Return (Mac OS) operating theatre Move into (Windows).

You put up prize multiple shapes by retention shoot down Chemise while clicking the shapes.

2

In the Mark Shape Attributes dialog box, enable the Stroke check up on box to apply an outline to the selected shape.

To remove the stroke, invalid the check boxful.

3

Two-baser-click the chip, choose a color from the Vividness dialog box, and click OK.

4

Correct the Opacity and Width sliders to control the opaqueness and width of the stroke.

5

Click matchless of the following Line Capital icons to control the endpoints of open shapes.

6

Tick one of the succeeding Line Join icons to determine how corners are created when 2 segments encounter.

7

Adjust the Miter Limit luger.

When lines are joined at a sharp slant, a sharp corner is created. You can set the miter limit to smooth out the sharpness.

8

Get across Fix New Shape Attributes.

When you select a human body with the Shape Selection puppet, you can besides specify the pursual attributes by using the buttons happening the property bar:

•

Toggle Stroke Color

•

Toggle switch Fill Gloss

To set shape fill attributes

1

With the Anatomy Selection tool , click a shape whose fill attributes you want to change, and press Return (Mac OS) or Enroll (Windows).

You can select multiple shapes by holding down Shift spell clicking the shapes.

2

In the Do Shape Attributes panel, enable the Fulfil assay boxful to apply a stroke to the selected shape.

To remove the fill, handicap the assay box.

3

Double-click the chip, choose a colour in from the Color dialogue box, and snap OK.

4

Adjust the Opaqueness slider to operate the opaqueness of the fill.

5

Click nonpareil of the following icons:

•

Fill Overlaps to occupy overlapping areas of multiple shapes.

•

Don't Fill Overlaps to leave overlapping areas unfilled. Multiple overlaps alternative between filled and not occupied.

6

Click Set New Shape Attributes.

You give the axe also specify roughly take and fill color in attributes connected the property bar when you select a shape with the Level Adjuster tool or the Shape Selection tool.

You can also utilise the Blue-pencil carte Occupy dominate or the Key Pail tool to fill a shape. Because these methods go for pixel data to the region, Corel Painter foremost converts the shape to a pixel-based layer. For more info, refer to Practical with Color Fills.

To set shape flatness

1

With the Shape Selection tool , click a shape whose flatness you want to change, and beseech Return (Mac OS) or Enter (Windows).

You can select multiple shapes away holding down Fault while clicking the shapes.

2

In the Plant Human body Attributes dialog box, adjust the Flatness Pseudemys scripta.

3

Click Set New Shape Attributes.

Commonly, it is non necessary to modification the flatness mount. You May want to deepen it to adjust for a particular high resolution pressman or to fend off a PostScript limitcheck error. Check with your output service to get word if they have a suggested flatness setting.

A change in flatness appears only in your output signal, not on your screen.

Place setting preferences for drawing shapes

If you deficiency to modify the default on appearance of the shapes that you draw, you can modify the shape preferences. When you change a preference, the new preference is applied to all the new shapes that you draw. If you want to clear distinguish a shape that's in the process of being drawn from a mould whose paths are closed, you can particularise preferences for each state. You can also modify the appearance of Bezier handles and single elements such every bit outlines and wings, to give information technology easier for drawing.

To set preferences for drawing shapes

1

Exercise one of the following:

•

(Mac OS) Select Corel Painter 12 Preferences Shapes.

•

(Windows) Choose Redact Preferences Shapes.

2

Do a task from the following table.

Human body Preferences	Description
On Draw - Fill with current color	Fills the shape with the presently selected Main color when drawing.
Along Draw - Stroke in current color	Outlines the shapes with the currently selected Main color when drawing.
On Stuffy - Fill with current color	Fills the frame with the currently selected Of import color once the shape paths are nonopening
Along At hand - Stroke in current color	Outlines the shapes with the currently selected Principal color once the shape paths are closed.
Big Handles	Controls the size of the anchor points and the direction of the wing handles. This fanny make them easier to grab and drag. If you deficiency big points, enable this option.
Colors - Wing/Bezier/Handle	Sets the color of the wings, Bezier, and handles.
Colors - Outline/Path	Sets the color of the anatomy outline paths.
Colors - Selected Point/Anchor	Sets the coloring of the selected anchor points. The random anchor points appear "hollow."
Align with concealed form	Aligns a brushstroke with a hidden shape or course.
Tolerance	Determines how juxtaposed the brushstroke essential be, in pixels, to the path OR shape for automatic alinement to occur.

---

---

Copyright 2012 Corel Corporation. Every rights reserved.

Draw Straight Line in Paint With Pencil Tool Illustrator

Source: http://product.corel.com/help/Painter/540235477/707000/EN/Doc/Creating_Shapes.html

Share this post